Rodelta i-HT (BB1)

Features:

• Highly efficient – low operation cost
• Compact size and less floor space
• Low down time – quickly fixable
• Low prime mover cost
• Lowest pumping – project cost
•  Dual Drive to reduce downtime
• The pumps are offered with CE marking

Specifications:

• Delivery Sizes Upto 300 mm
• Discharge 30-1300 m3 /hr
• Head 30 to 250 m
• Temperature -10 deg C to 90 deg C

Applications:

• Suitable for Fire fighting
• Primary & secondary HVAC application
• High pressure boosting system
• Dewatering in mines
• Cooling tower
• Recirculation
• Desalination
• Water supply
• Paper plant
• Steel plant for high pressure injection
• Sugar plant
• Industrial utility water application

Constructional features:

Pump Casing:
Horizontal axially spilt volute type, suction and discharge nozzles and supporting feet are cast integral with lower half casing.

Impeller:
Double or single suction type accurately balanced. In case of double suction impellers, the hydraulic thrust is balanced automatically because of pressure equalization on both sides of the impeller.

Shafts:
The high tensile steel shaft accurately machined and ground is supported by antifriction bearings. The shaft is protected by shaft sleeves from wear in stuffing box area.

Stuffing Box:
Can be sealed by gland packing or by mechanical seal and is suitable for liquids having temperature from -10°C up to 90°C.

Bearings:
Grease Lubricated deep groove ball / roller bearings are provided. Large pumps can be provided with Oil Lubricated / Oil ring bearings.

Direction of Rotation:
– Standard: Anticlockwise (ACW) when viewed from driving end.
– Optional: Clockwise (CW) when viewed from driving end.

Drive:
Suitable for coupling with electric motors, engines or steam turbines either directly or through belt drives, gear boxes etc.

Flanges:
– Standard: Drilled to BS: 10 Table D/E/F or BS-4504, Table PN16 plain face depending upon model.
– Optional: DIN /ASA with suitable pressure rating depending upon model.