We make use of cookies

To provide you with the best possible service, we make use of cookies. By accepting tracking cookies, you will be recognized. In that way, we can customize our website to your personal preferences and we can show you relevant information and advertisements on our website and others. If you agree, please click ‘I agree’. You can always view your settings and have them changed. For more information, see our cookie and privacy policy.

I agree
mix flow OH1
  • semi open impeller
  • Rodelta SPP pump
  • End suction
  • mixed flow
  • over hung OH1
  • non clog pump

Rodelta SPP (OH1)

The OH1, type SPP is an overhung end suction, volute casing, radially split pump with a back pullout design. These low head high capacity pumps can be either gland packed or mechanically sealed. Delivery options can be of either horizontal or vertical. These are majorly used in air conditioning, irrigation, drainage and storm water. Delivery size can vary from 200 mm to 650 mm.

For alternative specifications contact us.

  • chemical industryChemical Industry
  • district heatingDistrict Heating
  • Drinking waterDrinking Water
  • Dry dockDry Dock
  • Flood contoleFlood Control
  • General IndustryGeneral Industry
  • IrrigationIrrigation
  • Marine AplicationsMarine Applications
  • Power generationPower Generation
  • Pulp and paperPulp & Paper
  • Wast WaterWast Water
  • Water treatmentWater Treatment

Rodelta SPP (OH1)

This pump its part of the Rodelta on stock program.

Features:

  • Low head, high capacity pumps
  • Gland packed / Mechanical Seal
  • 50HZ / 60 HZ availability
  • Option available in horizontal as well as vertical delivery position
  • The pumps are offered with CE marking

Specifications:

  • Delivery size up to 650 mm
  • Capacity up to 7000 m³ /hr
  • Head up to 30 m
  • Temperature (-) 5 °C to 140 °C

Applications:

Pumping drainage water, Storm water, Supplying water from settling tanks in water works, Irrigation and agriculture for lift irrigation, Circulation of hot or cold water in industry, Air-conditioning plants, Power stations, Textile mills, Sewage handling and Flood control.

Constructional features:

Pump Casing:
Horizontal/Vertical end suction high efficiency volute type with Top/side/45 degrees orientations. Delivery flange and supporting feet are cast integral with the casing.

Impeller:
Non clog – Semi opens / Enclosed type and balanced dynamically. Hydraulically balanced by balancing holes / back vanes.

Shaft:
Made of high tensile steel, accurately grounded. Supported by deep groove ball bearings and thrust bearing housed in the bearing housing.

Stuffing Box:
Gland packed supply is standard for liquids having temperature up to 90°C
Mechanical seal can be supplied against request.

Bearing:
Deep groove ball bearing and thrust bearing.
Standard lubrication – Oil (except SPP 200 pump) SPP 200 is with grease lubrication.

Direction of Rotation:
Clockwise viewed from driving end.

Drive:
Suitable for coupling with electric motors, I.C. engines either directly or through belt drives/gear box.

Flanges:
Flanges shall be drilled as per BSEN 1092, PN 16 flat face except SPP 17 ½ – 20, SPP 55-60, SPP 60-65 pumps. For these models drilling will be BS 10 Table D.

Request info

Request datasheet

SPP (OH1)

EU US
  • Features Volute type,mixed flow- semi open/enclosed type impeller, back pull-out end suction pump
  • Capacity @ BEP Upto 7000 m3/hr Upto 30850 Gpm
  • Head Upto 30 m Upto 100 feet
  • Temperature range -20 to 90 °C -4 to 194 °F
  • Discharge pressure upto PN 10 upto 145 psig
  • Material (Casing/Impeller) Cast Iron, Bronze, SS, Duplex, Super Duplex
  • Nozzle Orientation (suc/dis) Top / side / 45 degrees delivery orientations
  • Standard Motor Sync. Speed 1500 rpm 1800 rpm
  • Options Gland packing / Mechanical Seal
  • Flange drilling standard BS EN/DIN/ANSI /ASA
Uw browser is niet meer van deze tijd!

Update uw browser om optimaal van deze website (en vele anderen) te genieten Nu updaten!

×