Rodelta SPV

Features:

• High efficiency = Low Power consumption
• Axial suction & tangential discharge
• Uniform power requirement over range
• Large solids handling ability
• Integral cast feet for greater stability
• Back pull out
• Suction flange access to impeller
• Packed gland or Mech. Seal options
• Electric or diesel driven
• Small pump footprint
• Construction of SPV design provides cost savings in building costs. (Linked example is worked out using LS as an example, however, the same parameters apply for SPV implementation.)

Specifications:

• Delivery size up to 500mm
• Capacity up to 7000m3/hr
• Head up to 30m per stage
• Suitable for liquid Temperature: Up to 90ºC
• Sealing Arrangement: Gland packing or with mechanical seals
• Flanges Drilling Standard: Flanges can be as per BS EN/DIN/ANSI/ASA standard

Applications:

• Irrigation
• Light/Medium Slurries
• Drainage water
• Data Center
• Return activated Sludge
• Large volume low heads

Applications:

• Agricultural
• Water
• Chemical & Petrochemical
• Municipal

Constructional features:

Pump Casing:
Vertical end suction high efficiency volute type with suction bend

Impeller:
Non clog – Semi opens / Enclosed type and balanced dynamically.
Hydraulically balanced by balancing holes / back vanes.

Shaft:
Made of high tensile steel, accurately grounded. Supported by deep groove ball bearings and thrust bearing housed in the bearing housing.

Stuffing Box:
Gland packed supply is standard for liquids having temperature up to 90°C
Mechanical seal can be supplied against request.

Bearing:
Deep groove ball bearing and thrust bearing.
Standard lubrication – Grease lubrication.

Direction of Rotation:
Clockwise viewed from driving end.

Drive:
Suitable for coupling with electric motors.