We make use of cookies

To provide you with the best possible service, we make use of cookies. By accepting tracking cookies, you will be recognized. In that way, we can customize our website to your personal preferences and we can show you relevant information and advertisements on our website and others. If you agree, please click ‘I agree’. You can always view your settings and have them changed. For more information, see our cookie and privacy policy.

I agree
API Cantilever VS5

Rodelta TCZ (API Cantilever VS5)

The pump type TCZ (VS5) is a vertically mounted suspended single casing volute pump “true” cantilever pump with no shaft supports, seals, bearings or bushings below the bearing housing. All bearings are suspended in a cartridge above the cover plate to provide protection in case of flooding. The TCZ has a closed impeller and can be supplied with a wide variety of competitive hydraulics. Also see our pump types TCE (VS5), TCN (VS5), - TCF (VS5), for more hydraulic options.

For alternative specifications contact us.

  • chemical industryChemical Industry
  • General IndustryGeneral Industry
  • Oil & Gas Down streamOil & Gas Downstream
  • Oil & Gas UpstreamOil & Gas Upstream
  • Power generationPower Generation

Rodelta TCZ (API Cantilever VS5)

Features: TCZ ( API Cantilever VS5 )

  • According API 610 (VS5)
  • Used in applications with liquids containing solids or abrasive slurries
  • When no intermediate bearings inside the liquids are allowed
  • Low OPEX and CAPEX which results in a low total cost of ownership
  • Performance of the pump can be customized to customer requirements by means of a closed, open and semi-open impeller
  • Where leakages are forbidden for environmental and health protection reasons
  • Dry well or wet well
  • Can run dry indefinitely

Specifications:

  • Delivery size up to 200mm
  • Capacity up to 1.200m3/hr
  • Head up to 50m
  • Suitable for liquid Temperature: Up to 200ºC
  • Sealing Arrangement: Gland packing or with mechanical seals

Applications:

  • Abrasive or heavy contaminated liquids in refineries petrochemical and industrial plants Clean/contaminated fluids.
  • Homogeneous slurries.
  • Medium Hydrocarbons.
  • Primary, Secondary & activated sludge.
  • Liquids with entrained gases

Constructional features:

  • Heavy-duty roller bearings, non floating shaft will guarantee long bearing lifetime
  • All VS5 models are fully designed to fit mechanical seal in accordance to API682
  • Flanges Drilling Standard: Flanges can be as per BS EN/DIN/ANSI/ASA standard
  • Rigid constructed base frame and support housing assures precise and accurate mounting

 

Also see our pump types TCE (VS5), TCN (VS5), – TCF (VS5), for more hydraulic options.

Request info

Request datasheet

TCZ (API Cantilever VS5)

EU US
  • Design standard ISO 13709 ISO 13709
  • Features Vertical suspended, cantilever ,volute VS5 type (API610)
  • Capacity @ BEP Upto 300 m3/hr Upto 1320 Gpm
  • Head Upto 250 m Upto 820 feet
  • Temperature range -20 to 250 °C -4 to 480 °F
  • Discharge pressure Upto Cl. 150# Upto Cl. 150#
  • Nozzle Orientation (suc/dis) Discharge through side discharge pipe
  • Standard Motor Sync. Speed 750/1000/1500 rpm 900/1200/1800 rpm
  • Max. Operating Speed 1800 rpm
  • Flange ratings(#RF) Cl. 150/300
  • Maximum Suspension Length upto 2,5m (with suction pipe higher depths possible)

Related products

Uw browser is niet meer van deze tijd!

Update uw browser om optimaal van deze website (en vele anderen) te genieten Nu updaten!

×